Basically a custom recovery more powerful than stock android recovery. It can flash update files, take full nandroid backup of phone and install the custom roms and zip files on your phone. If you are an Android Geek then you probably can’t live without installing a custom recovery on your phone. Also there are many amazing custom roms out there which are only possible to install through a custom recovery. So, head to the tutorial below to install CWM Custom Recovery on Galaxy Note 2 N7100.
You can install the custom recovery on your phone by following the instructions below. Custom Recovery is a recovery or phone diagnostic mode which enables the user to do different tasks on the phone like taking the full nandroid backup, wiping the caches/data etc, installing the custom roms, update files, zip files etc. A custom recovery is a little different from the stock Android Recovery 3e, it is more powerful capable of doing more operations. We will use Odin to flash the custom recovery on the Galaxy Note 2. Odin is Samsung’s official tool for flashing update files on its devices. The guide to install CWM Custom recovery on Galaxy Note 2 N7100 is given step by step below. Please read the disclaimer and necessary instructions before proceeding. If you want to root your Galaxy Note 2 then refer to the link below. Root Samsung Galaxy Note 2 N7100
The following method is only for Galaxy Note 2 Model-No GT-N7100. Do not try this on any other model. The method is for advance users only.You should not do this if you are completely unaware of this. Remember that Droidopinions.com will not be held responsible if something goes wrong with your device during or after the process. Do this at your own risk only. Installing a custom recovery is an unofficial process and you will void you phone’s warranty by doing this, Thanks
CWM Recovery for N7100 Odin v3.09 Samsung USB Drivers
Step-1
Download the CWM recovery file on your PC from the link above and extract the file. You will get a tar.md5 extension file extraction. Now download the Odin v3.09 and extract it.
Step-2
On your phone go to the Settings»Developer Options, scroll down to USB Debugging mode and enable it. If you don’t find developer options then go to Settings»About Phone and tap on Build No seven times repeatedly to activate developer options on your phone and then go back, open developer options to enable USB Debugging.
Step-3
Turn off your device after enabling the USB Debugging mode. Enter in to download mode by pressing and holding Home+Volume Down+Power button for few seconds until a warning screen appears. Press the volume up from the warning screen to confirm the task.
Step-4
Launch the Odin flash tool on your PC.
Step-5
Now connect your phone to the PC via a USB Data cable. You will see that the ID”Com box in Odin will turn blue after you connect your phone to the PC. This means your device is connected and recognized successfully.
Step-6
In the Odin, click on the AP option and choose extracted (tar.md5) CWM Recovery file that you have downloaded in the first step. Make sure that Auto Reboot and F.Reset Time options are checked in Odin. Leave rest of the options unchecked.
Step-7
After choosing the CWM recovery file in Odin click on the Start button to begin installing the custom recovery on your phone.
Step-8
Odin will now start installing the recovery on your phone. Wait till the process completes. Leave your phone free while the process.
Note: If Odin stops at any point then unplug the cable, reconnect and do the whole process again.
Step-9
After the completion of the process, a PASS message will appear on the screen Odin and your device will automatically reboot.
Step-10
Disconnect the phone when it restarts and wait some time. Your phone will show up the home screen after sometime with the new CWM custom recovery installed. And All Done!!! If you device is stuck at boot screen/samsung logo then follow these instructions (here )to solve the problem.
By doing the above process you have successfully installed the custom recovery on your phone. Hope you like our tutorial to install cwm custom recovery on Galaxy Note 2 N7100. If you have any questions then ask in the comments section below.
Check the New Custom Recovery on Your Phone
If you want to check the new custom recovery on your device then you can go to the recovery mode for checking the new cwm recovery on your device. Follow the instructions below to check the new custom recovery on your device. You can check the new recovery here in the recovery mode. You scroll down and up by volume button and select by power button. Now scroll to the reboot system now option and select it to restart your phone. So, that was all for today. Now time to go guys./ Bye!!! Please like,share and subscribe. Comment below to share your views.
